| Aube by Honeywell TI035/U Solar Time Table, Programmable Timer Switch, White | 
| Brand: Aube by Honeywell
Category: Home Improvement
This item is no longer available
Rating:  37 reviews
Sales Rank: 24,621
Media: Tools & Hardware
Shipping Weight (lbs): 0.4
Dimensions (in): 9 x 6.3 x 2.3
MPN: TI035
Model: TI035/U
UPC: 775264303517
EAN: 0775264303517
ASIN: B000EA6TLA
Tell A Friend
Add to Wedding Registry
Add to Baby Registry
| |
| Features:
| • | Sleek design mounts flush with standard decorative wall plate (not included) | | • | Two-operating modes: manual (conventional on and off switch), automatic | | • | Sunrise(off) and sunset(on) programming: no need to re-set on and off times, sets on and off times based on the location of your city, on and off optional settings, i.e. turn lights off at midnight and on by sunrise, easy daylight savings time adjustment | | • | Connection: 3-wire (line, load, neutral and 2400-Watt maximum; 1-HP at 120-Volt) | | • | Dimensions (height by width by depth): 2.7-Inch by 1.8-Inch by 1.6-Inch |
|
| Similar Items:
| |
| Editorial Reviews:
Product Description
Timer switch turns lights on and off based on sunrise/sunset in your area. You don't have to spend hours adjusting the programmed on and off times on a light switch timer as the seasons change. Program your lights or appliances to turn on at sunset based specifically on your area with the Aube Solar Timer Switch 2400W, an attractive timer switch that can control incandescent, halogen or fluorescent lighting or even a 1-HP motor. Need to find something quickly late at night? No problem: The Aube Solar Timer Switch 2400W offers a manual override, which enables the load to be turned on and off without affecting the programming. A Decora-style wall plate is not included. Mount the Aube Solar Timer Switch 2400W onto a standard single or multi-gang electrical box. Program your city's longitude and latitude based on the included guide, and the Aube Solar Timer Switch 2400W will make sure your lights are on when you get home after dark. It even adjusts automatically for Daylight Saving Time if you live in an applicable zone. Programs are protected against a power failure by a pre-installed rechargeable battery. You can take advantage of optional on and off settings to turn lights on at a specific time and off at sunrise, as an example. Additional features include an LCD that shows the time, day and load status.
|
| Customer Reviews:
 Great timers June 22, 2010
Frog Man (Tuckahoe, New York)
These timers work great and are no harder to install than any other built-in timer would be. Programming is a little difficult, as I don't think the instructions are as clear as they could be, but it only takes a few minutes of careful reading and following instructions to do. The best thing is that since the timer automatically follows the sunset times, you don't need to mess with it very often. So I'm happy. I installed two of these and they work as promised.
 No problems so far (2 months) May 24, 2010
Scott Harris (Florida, USA)
This timer was easy to install and relatively easy to program. So far it has worked flawlessly.
Automatic timer May 24, 2010
bw
The instructions were generally clear. There are a number of programming steps and you need to be careful entering the five required entries for the sunse/sunrise program, especially setting the day number and negative longitude. Once set, you can forget about it since the solar tracking feature takes care of adjusting the on-off times to sunset and sunrise.
Aube TI035/U Excellent Product May 24, 2010
R. Phillips
Very good quality, easy to install, and works as advertised. Purchased one initially to see how well it worked. Was quite pleased and purchased two more. Use for turning on and off outside house lights at sunset and sunrise. Set it and forget it. No longer have to remember to turn the lights off in the morning, and also lights are always on whenever coming home after dark.
Timer that works with incandescent and compact fluorescents bulbs May 18, 2010
W. Eashoian
I installed this for our front house lights. It works perfect. I have two black wires connected to the switch. Removed the both wires and used a voltmeter to identify the hot black wire. Used the white bundle wire in the box to connect to the white, connected black to hot black wire, and blue to the second black wire.
|
|
|
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME. Web Design, Maintenance, and Hosted by K9Sites.com | |
